Sniper's Edge Hockey ULTIMATE GOALIE Installation Instructions
The Sniper's Edge Hockey Ultimate Goalie can be easily installed in a matter of minutes. Follow the steps below and you'll be firing wristers, snap and slap shots in no time!
|
Step 1. Set the top edge of the Ultimate Goalie over the cross bar and on top of the goal so that the bottom edge of the Ultimate Goalie just touches the ground/ice. Also center the Ultimate Goalie left and right. Pull the bungee end through the metal grommet on the Ultimate Goalie. |
 |
|
Step 2. Pull the end of the bungee toward the back of the goal and go through a loop in the goal net. |
 |
|
Step 3. Pull the end of the bungee toward the front of the goal and bar toward the small ball. |
 |
|
Step 4. Loop the end of the bungee around the small ball. |
 |
|
Step 5. Repeat for the other two bungees on top of the goal. |
 |
|
Step 6. Repeat for each of the two bungees on the left and right side of the goal. |
 |
